Show simple item record

dc.rights.licenseCC-BY-NC-ND
dc.contributorMilou Dingemans, KWR Water Research Institute Astrid Reus, KWR Water Research Institute
dc.contributor.advisorExterne beoordelaar - External assesor,
dc.contributor.authorFerrario, Adele
dc.date.accessioned2023-01-11T01:01:00Z
dc.date.available2023-01-11T01:01:00Z
dc.date.issued2023
dc.identifier.urihttps://studenttheses.uu.nl/handle/20.500.12932/43422
dc.description.abstractEnvironmental contaminants are present in water sources, so drinking water treatments are applied. However, these contaminants can be transformed into new chemicals – called transformation products (TPs) – often unknown and undetected by analytical techniques (Gogoi et al., 2018; Brunner et al., 2019; Zahn et al., 2019; Menger et al., 2021). Therefore, predicting TPs' formation during drinking water treatments must be addressed (Kiefer et al., 2019). At the same time, predictive toxicology can help identify TPs of great toxicological concern and steer further analysis. However, there is an urge to assemble available methods to design and implement the next-generation risk assessment (NGRA) in regulatory frameworks (Pallocca et al., 2022). Therefore, this research focused on developing a rational scheme for predicting TPs formation because of drinking water treatments, their physicochemical characteristics (PCC), and toxicological hazards. The effectiveness of freely available in silico tools in predicting, prioritizing, and evaluating TPs was discussed here. S-metolachlor TPs were used as proof of the applicability of the methodology. The reliability of the methods varies depending on the specific reaction pathway, PCC, or endpoint considered. The Chemical Transformation Simulator (CTS) and enviPath were demonstrated to be the best available combination for predicting TPs originating from drinking water treatments. EpiSuiteTM was recommended for the PCC evaluation, and VEGA QSAR for the hazard prioritization. Whether the predicted prioritized S-metolachlor TPs could represent a human health risk via drinking water or an environmental concern for their impact on ecosystems requires further research, as well as the development of an automation workflow for the use of the applied in silico tools, is required.
dc.description.sponsorshipUtrecht University
dc.language.isoEN
dc.subjectThe present research focused on developing a rational scheme for predicting TPs formation because of drinking water treatments, their physicochemical characteristics (PCC), and toxicological hazards. The effectiveness of freely available in silico tools in predicting, prioritizing, and evaluating TPs was discussed here. S-metolachlor TPs were used as proof of the applicability of the methodology.
dc.title0 IN SILICO TOOLS TO PRIORITIZE TRANSFORMATION PRODUCTS OF PESTICIDES ORIGINATING FROM DRINKING WATER TREATMENTS: S-METOLACHLOR AS A PROOF OF PRINCIPLE
dc.type.contentMaster Thesis
dc.rights.accessrightsOpen Access
dc.subject.keywordsin silico tools, transformation products, drinking water treatments, predictive toxicology
dc.subject.courseuuToxicology and Environmental Health
dc.thesis.id13049


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record